Kusam Meco Digital Insulation Resistance Tester KM 1152MF
Brand : Kusam Meco
Model : KM 1152MF
Features :
* The “KUSAM-MECO” 1152MF has features for Insulation Resistance Testing, Polarisation Index measurement & Die electric Absorption ratio measurement, Voltage (AC-DC) measurements with Automatic Hold facility, Continuity Test with a short circuit current of
Minimum 200mA.
* Two very unique features are found on the Multifunction Model1152MF, MOV and Gas Arrester testing.
* Today, most equipments and electrical installations are protected by MOVs and Gas arresters.
* The 1152MF can test these devices to establish if the devices are still operating correctly or not.
* Energy conservation is featured on all these new Advanced Products.
* EnerSave limits the test duration to about 10 Seconds to save energy.
* This new generation of test equipments have no moving parts. All calibration are saved internally in a non volatile memory.
* Their calibration interval can be extended without much problem.
* They comply to all the latest regulations, including UK 16 Edition.
* Meets IEC/EN 61010-1 CAT III 600V.
Specifications :
* Display : 2 lines x 16 characters LCD
* Buzzer Threshold : 3 W
* Auto-Null Threshold : 5 W
* Fast Test : 10 Sec
* Long Test : 60 Sec
* With PI and DAR test Function : 10 Min
* Load Battery Test Current : About 300mA
* Operating Temperature : 1 C to 55 C (not in full sun light)
* Storage Temperature : -20 C to 70 C
* Relative Humidity :£ 80% R.H.
* Open Current : about 19.15mA
* Consumption Current : about 193.5mA
* Power Source : 1.5 x 8 (Type “AA” size alkaline)
* Dimensions : 175(L) x 85(W) x 75(H)mm
* Weight : 655g Approx. (Battery included)
ACCESSORIES : Test Leads (TEL-AL11-A), Shoulder belt, Instruction Manual, Batteries.
For more information, please visit our website: www.autocon.biz
Model : KM 1152MF
Features :
* The “KUSAM-MECO” 1152MF has features for Insulation Resistance Testing, Polarisation Index measurement & Die electric Absorption ratio measurement, Voltage (AC-DC) measurements with Automatic Hold facility, Continuity Test with a short circuit current of
Minimum 200mA.
* Two very unique features are found on the Multifunction Model1152MF, MOV and Gas Arrester testing.
* Today, most equipments and electrical installations are protected by MOVs and Gas arresters.
* The 1152MF can test these devices to establish if the devices are still operating correctly or not.
* Energy conservation is featured on all these new Advanced Products.
* EnerSave limits the test duration to about 10 Seconds to save energy.
* This new generation of test equipments have no moving parts. All calibration are saved internally in a non volatile memory.
* Their calibration interval can be extended without much problem.
* They comply to all the latest regulations, including UK 16 Edition.
* Meets IEC/EN 61010-1 CAT III 600V.
Specifications :
* Display : 2 lines x 16 characters LCD
* Buzzer Threshold : 3 W
* Auto-Null Threshold : 5 W
* Fast Test : 10 Sec
* Long Test : 60 Sec
* With PI and DAR test Function : 10 Min
* Load Battery Test Current : About 300mA
* Operating Temperature : 1 C to 55 C (not in full sun light)
* Storage Temperature : -20 C to 70 C
* Relative Humidity :£ 80% R.H.
* Open Current : about 19.15mA
* Consumption Current : about 193.5mA
* Power Source : 1.5 x 8 (Type “AA” size alkaline)
* Dimensions : 175(L) x 85(W) x 75(H)mm
* Weight : 655g Approx. (Battery included)
ACCESSORIES : Test Leads (TEL-AL11-A), Shoulder belt, Instruction Manual, Batteries.
For more information, please visit our website: www.autocon.biz
Comments
Post a Comment