Tuesday, 22 August 2017

Taparia Drift Centre & Leather Punch Set DCLP 7

Brand : Taparia
Model : DCLP 7

For More Information About Taparia Drift Centre & Leather Punch Set DCLP 7 : Click Here!

About Taparia :
TAPARIA TOOLS started manufacturing hand tools in 1969 in India in technical collaboration with a reputed company of Sweden.
The senior management from Taparia Tools had gone to Sweden and took practical training in their plant for more than a year. A senior technical manager from the Swedish company also came to India and stayed here for about two years to establish the technology in India with the appropriate hand holding.

Taparia Tools has been since then consistently producing all the hand tools in India with the exact technology of its collaborators.

The company has a well laid out fully equipped factory located at Nashik, which is about four hours drive from the city of Mumbai in Western India and another expanded unit at Goa, approx 600 kilometers from Mumbai. The plant is located on a total area of 42832 Sq.Mtrs. All the manufacturing facilities required for production of hand tools are under one roof – one location. Hand tools manufacturing is complicated involving high technology and labor intensive production process. Out of the total of 1200 work force of this, the number of people engaged in direct production is 1000. The remaining are in administrative and management.

The Company’s manufacturing facilities includes modern Forge shop, Machine shop, Heat treatment, Polishing, Nickel chrome plating and so on.

The Company has a design and development department with latest CAD design facilities where all the designs of products and modifications there of and also fixtures and toolings are made. This includes the designs of forging - dies, machining fixtures, cutting tools like broaches, etc

Vision & Values :
Taparia is a one stop source for all kinds and varieties of Hand tools.
Taparia Hand tools give its customers the best value for money.
Taparia are tool makers to the Nation.
Switch to TAPARIA and experience the difference.

Product Range :
Adjustable Spanners, Pliers, Testers, Screwdrivers & Sets, Tool Sets, Sockets, Pipe wrenches & Vice, Hammers, Clamps, Wheel Spanners & Sets, Spanners & Sets, Chisels, Punches, Magnetic Products, Cutters, Hacksaw Blades, Allen Keys & Sets, Gear Pullers, Tools Trolley, Spirit Level, Cutting Blades, Non Sparking Tools.

Description & Specifications :
A centre punch is used to mark the center of a point. It is usually used to mark the centre of a hole when drilling holes. A drill has the tendency to "wander" if it does not start in a recess. A centre punch forms a large enough dimple to "guide" the tip of the drill. The tip of a centre punch has an angle between 60 and 90 degrees. When drilling larger holes, and the web of the drill is wider than the indentation produced by a centre punch, the drilling of a pilot hole is usually needed.

An automatic centre punch operates without the need for a hammer.

A drift "punch" is misleadingly named; it is not used as a punch in the traditional sense of the term. A drift punch, or drift pin, or lineup punch, is used as an aid in aligning bolt or rivet holes prior to inserting a fastener. A drift punch is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole. As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener. Unlike most punches, force is never (and should never be) applied to the tip, or end of a drift pin.

No. of pieces : 1004, 1884, 1984, 1985, 1786, 1787, 1788

Buy Taparia Drift Centre & Leather Punch Set DCLP 7 at Lowest Price On Our Website : www.autocon.biz


No comments:

Post a Comment

L&T Power Contactor MNX-9 3POLE 1NO CS94106

Brand : L&T Model : CS94106 L&T Power Contactor MNX-9 3POLE 1NO : A Power Contactor is an electrically-controlled switch used for...