Thursday, 8 September 2016

Kusum Meco Digital Watt Power Clamp Meter KM 2760

Brand : Kusum Meco
Model : 2760

Features
Digital Dc / Ac Watt Power Clamp Meter KM 2760
Installation Categories III
Indoor use only.
Altitude up to 2000 meters
3-phase 3-wire & 4-wire.
Data Hold ? Auto Power off


General Specification :
  • AC Sensing : Average Sensing
  • Jaw size : Cables f 40mm
  • Display : 3¾ Digits 3999 Counts liquid crystal LCD display
  • Maximum Voltage between any terminal and earth ground : 750V rms.
  • Pollution Degree : 2
  • Over range Indication : LCD will show a “OL” in the highest position.
    (Except for ranges of 1000A , & 1000V or 750V ) AC DC AC
  • Sampling Rate : 2.5 times / sec (Digital Display)
  • Polarity : Automatic polarity “-” display for negative input
  • Operating Temperature & Humidity : 0°C to 40°C; < 80% R.H. Noncondensing.
  • Storage Temperature & Humidity : -10°C to 60°C; < 80% R.H. Noncondensing.
  • Auto power off : The meter powers off 15 minutes later after the last operating was made.
    To bring back the display, please turn rotary switch to more positions or push any button.
  • Power Supply : 1.5V AA x 2 Alkaline battery.
  • Dimension : 228(L) x 76(W) x 39(H) mm.
  • Weight : approx. 400 g (Including Battery).
 For more information, please visit our website : www.autocon.biz

 

No comments:

Post a Comment

L&T Power Contactor MNX-9 3POLE 1NO CS94106

Brand : L&T Model : CS94106 L&T Power Contactor MNX-9 3POLE 1NO : A Power Contactor is an electrically-controlled switch used for...